1,2-Diketones as photoinitiators of both cationic and free-radical photopolymerization under UV (392 nm) or Blue (455 nm) LEDs

The photoinitiation abilities of three 1,2-diketones [i.e., acenaphthenequinone ( ANPQ ), aceanthrenequinone ( AATQ ), and 9,10-phenanthrenequinone ( PANQ )]-based photoinitiating systems [PISs, with additives such as iodonium salt, N-vinylcarbazole (NVK), tertiary amine, and phenacyl bromide (R-Br)] for cationic photopolymerization and free-radical photopolymerization under the irradiation of ultraviolet (UV; 392 nm) or blue (455 nm) light-emitting diode (LED) bulb are investigated. All 1,2-diketones studied exhibit ground state absorption that match with the emission spectra of UV (392 nm) or blue LED (455 nm) better than that of the well-known blue-light-sensitive photoinitiator camphorquinone (CQ). In particular, AATQ /iodonium salt/NVK can show high photoinitiating ability (with epoxide conversion yield >70%) under the UV light irradiation due to the effect of NVK. In addition, 1,2-diketone/iodonium salt (and optional NVK) systems are capable of initiating free-radical photopolymerization of methacrylates, with conversions of 50–58%. Furthermore, some 1,2-diketone/tertiary amine (and optional R-Br) combinations are found to demonstrate high efficiency to initiate free-radical photopolymerization, and 71% of methacrylate conversion can be achieved with PANQ /tertiary amine/R-Br PIS. Some 1,2-ketone-based PISs can even exhibit higher efficiency than the CQ-based systems. The photochemical mechanism of the radical generation from the 1,2-diketone-based PISs is investigated and found to be consistent with the related photopolymerization efficiency. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 792–802     

基于有序介孔碳的氯离子选择性电极的制备及其在手持传感系统中的应用

以有序介孔碳(OMC)球为离子-电子转换层,制备了固态氯离子选择性电极,构建了基于离子敏感的场效应晶体管(ISFET)的手持式传感系统,用于检测人体血清中的氯离子。优化了OMC前驱体的碳化温度,探究了OMC形貌结构对电极传感性能的影响;电极柔性化制备后考察了其在手持系统中对氯离子的检测效果。结果表明,最优条件下,电极在5.12×10^-4~1.02 mol/L的浓度范围呈现线性响应,响应斜率为60 mV/decade。该柔性电极在手持传感系统中展现出高灵敏度和重现性,可用于人体血清样品中氯离子的检测,其回收率为96.3%~104.9%。     

Precise measurement and control of the pressure-driven flows for microfluidic systems

The pressure-driven device is designed and the flow rates of the microfluidic systems can be supplied by the pressure-driven flows, which can significantly reduce the flow-rate fluctuations coming from the pump source. For pressure-driven flows, the flow rates of the fluids can be predicted by measuring the pressure drop along a polytetrafluoroethylene (PTFE) tubing. Especially, by varying the geometrical parameters of the PTFE tubing, the predicted flow rates of the fluids are compared with the experimental measurements, and the testing precision of the pressure-driven flows can be obtained. Meanwhile, the dynamic characteristics of the open-loop and closed-loop control pressure-driven device are comparatively studied. Particularly, a proportional and integral (PI) controller is integrated with the closed-loop control pressure-driven device, and the effects of the parameters of the PI controller on the dynamic characteristics of the pressure-driven devices are mainly discussed. Most importantly, by improving the dynamic characteristics of the pressure-driven devices, precise measurement and control of the pressure-driven flows can be achieved for microfluidic systems.     

Efficient catalytic degradation of single and binary azo dyes by a novel triple nanocomposite of Mn3O4/Ag/SiO2

The strategy of structurally integrating noble metal and metal oxides is expected to offer exceptional opportunities toward emerging functions of all. We report the creation of an efficient hetero-structured nanocatalyst consisting of Mn₃O₄ core, SiO₂ shell impregnated with noble Ag nanoparticles. The triple nanocatalyst Mn₃O₄/Ag/SiO₂ was synthesized by using a facile three-step approach to disperse Ag nanoparticles between the surfaces of functionalized Mn₃O₄ and SiO₂. The physicochemical structural characterization was performed by XRD and FTIR. The surface morphologies were observed by SEM and TEM. The EDX measurements confirmed the composition of the composite. The nanocomposite has been used as a catalyst for the degradation of Direct blue 78 in the presence of sodium borohydride (NaBH₄). It has a drastic catalytic effect as compared to Mn₃O₄/Ag and Mn₃O₄. The rate constant of Direct blue 78 reduction followed the order: Mn₃O₄/Ag/SiO₂ (0.25166 min⁻¹) > Mn₃O₄/Ag (0.07971 min⁻¹) > Mn₃O₄ (0.00947 min⁻¹). The effects of different reaction conditions of the catalytic reaction have been determined. The catalytic activity of the as- synthesized nanocomposite was examined for the binary dyes system by incorporation of an additional dye (Sunset yellow). Its influence on the degradation rate and efficiency of Direct blue 78 was investigated. The nanocatalyst exhibited excellent catalytic activity towards the complete degradation of both the Direct blue 78 and Sunset yellow. The degradation percentage for these dyes reached 99.33 and 94.68%, respectively. The recovery and reusability of the Mn₃O₄/Ag/SiO₂ nanocomposite was studied in the reduction reaction of Direct blue 78. Five consecutive recovery reaction cycles were performed. They revealed high stability and constant efficiency of the catalyst for four cycles.     

苗族服饰色彩体系构建研究

色彩是民族服饰的核心要素，也是民族文化元素的重要组成部分，构建一套兼具科学性与实用性的色彩体系极具挑战性。在传统色彩地理学方法基础上，通过提取主题色和改进的关联规则挖掘方法，获取色彩数据、寻找色彩规则，并对其进行自然色彩体系（NCS）编谱分析，构建了一套苗族服饰色彩体系（Miao’s costume color system,MCCS）。该体系有助于进一步挖掘苗族服饰的配色规律，实现对苗族服饰色彩的数字化保护，为民族服饰色彩传承机理的探索与研究提供新的思路。     

Enhancing optomechanical force sensing via precooling and quantum noise cancellation

We theoretically investigate optomechanical force sensing via precooling and quantum noise cancellation in two coupled cavity optomechanical systems.We show that force sensing based on the reduction of noise can be used to dramatically enhance the force sensing and that the precooling process can eifectively improve the quantum noise cancellation.Specifically,we examine the effect of optomechanical cooling and noise reduction on the spectral density of the noise of the force measurement;these processes can significantly enhance the performance of optomechanical force sensing,and setting up the system in the resolved sideband regime can lead to an optimization of the cooling processes in a hybrid system.Such a scheme serves as a promising platform for quantum back-action-evading measurements of the motion and a framework for an optomechanical force sensor.     

颗粒材料三维应力路径下的接触组构特性

颗粒材料的宏观应力变形特征与其微观接触力、组构等紧密相关.一般而言,强接触系统属于颗粒内部体系的传力结构,其对应的组构张量是影响宏观应力性质的重要因素.细观数值方法(如离散单元法)能够反映物理试验的基本规律,并且可以方便地提取宏微观数据来研究颗粒体系的应力变形机制.采用离散单元法(discrete element method,DEM)进行一系列等$p$等$b$应力路径下颗粒材料的真三轴试验,在此基础上研究了三维应力路径下颗粒材料的宏微观力学参数的演化过程、三维组构张量与应力张量多重联系以及强接触体系反映的宏观应力特征.研究表明:颗粒体系偏应力峰值状态和临界状态均存在与加载路径无关的宏微观特征;三维应力路径下组构张量与应力张量存在非共轴性,但其联合不变量演化过程表现出加载路径无关的特征;与弱接触系统的组构张量相比,强接触系统的组构张量更能反映宏观应力张量的特征;强弱接触体系的组构张量对颗粒体系宏观响应的贡献不同,其分界点存在一定取值范围,但采用平均接触力较为简单合理.      

A layer potential analysis for transmission problems for Brinkman‐type systems in Lipschitz domains in

The aim of this paper is to establish a well‐posedness result for a boundary value problem of transmission‐type for the standard and generalized Brinkman systems in two Lipschitz domains in , the former being bounded, and the latter, its complement in . As a first step, we establish a well‐posedness result for a transmission problem for the standard Brinkman systems on complementary Lipschitz domains in by making use of the Potential theory developed for such a system. As a second step, we prove our desired result (in L²‐based Sobolev spaces) by using a method based on Fredholm operator theory and the well‐posedness result from the previous step.     

Point availability of Gaver’s duplex system supervised by a safety device unit

We analyse the point availability of Gaver’s parallel system supervised by a safety device. For safety reasons, no unit is allowed to operate without supervision. The entire system is attended by two heterogeneous repairmen. Our methodology is based on the theory of sectionally holomorphic functions combined with the notion of dual transforms. As an application we consider Coxian repair time distributions.